Jumbo Sliding Door
Cabinet Specifications
|
Materials: Jumbo Sliding Door Cabinets are fabricated of high quality, cold rolled carbon steel,
free of scale or rust and fully pickled. Exposed edges, corners
and surface areas are free of sharp edges and all workmanship
is of the highest quality as measured by the industry. |
| |
Finish: All steel components shall be thoroughly cleaned and
phosphatized for rust resistance in a five-stage pre-treatment
process. A high grade of polyester/epoxy powder paint is to be
applied electrostatically with a gloss reading of between 55 and
65. The finish shall have a salt spray rating of 250 hours or
more. |
| |
Top Track: The top track is 19 gauge steel, formed into a 3-3/16"
deep "C" formation having two 1-1/4" hemmed legs. The top track
has a 20 gauge steel channel formed into a 1-5/16" deep "C" formation
having two 1-1/8" hemmed legs welded inside, making a
track for the inside & outside sliding doors to slide in. |
| |
Bottom Track: The bottom track outside channel is 14 gauge
steel, formed into a 1-7/16" wide by 3-3/16" deep "C" formation. The
bottom track has three welded bottom track tie brackets to secure
track to corresponding uprights. The bottom outside track has a
14 gauge steel channel, formed into a 1-5/16" deep "C" formation
having two 9/16" legs, welded in place for the door rollers to roll
on. The bottom track base panel is 18 gauge steel, formed into
a 2-1/4" wide x 3-5/8" deep flanged formation and welded to the
bottom track outside channel. |
| |
End Frame: The end frames are 18 gauge steel formed into a
flanged formation. The end frame has a rear flange of 3/4", front
flange of 15/16", top flange of 5/8" and 3-1/4" deep. The end frame
is secured to the cabinet sides with 4 hinge pins. |
| |
Sliding Doors: Sliding doors are formed from 19 gauge steel with
1" thick channel formation on the edges. The sliding doors have
two rollers that are mounted through slots on the bottom of the doors with four 10-24 screws and nuts. The sliding doors accept
lock securely with a cam. |
| |
Recessed Pulls: Doors are furnished with a durable black
plastic recessed handle with
a plastic chrome frame. |
| |
Rollers: Roller assemblies provide smooth transition to sliding
doors with steel ball bearings. |
| |
Locking System: The system consists of a cam lock that secures
the two doors together. With both doors closed, the cam
lock on the outside door secures the two doors together using
a slot in the inner door. |
| |
Sides: 20 gauge steel, flanged at the top, bottom and rear with
a channel formation in front. |
| |
Backs: 22 gauge steel with 3/4" bottom flange. Dog-ear strips
are formed in the back. |
| |
Sill: 20 gauge steel channel formation with return flange for
door strike. Flanged at ends. |
| |
Doors: 20 gauge steel, flanged at the top, bottom and rear.
Channel formation at edges. Door strike on left hand door is
hemmed for smooth edge. |
| |
Tops: 20 gauge steel with flange on rear
|
| |
Shelf Strip: 22 gauge steel. |
| |
Shelf: Constructed of 24 gauge steel with full welded "BOX"
formation in front and back of shelf and has formed channels
on both ends. All corners are fully lapped and welded at two
points in each corner. The "BOX" formation is welded on a
minimum of 3" centers, the entire length of the box. All shelves
have a profi le height of 1-5/16".
|
| |
 |
Extra wide sliding doors cabinets offer five openings with four adjustable shelves, two recessed handles, and a single-point cam lock for extra security. Smooth-sliding doors allow access without intruding into aisleways. Storage cabinets are contructed from top quality steel. Welded box formed steel shelves offer exceptional strength with weight capacities up to 400 lbs. per shelf, evenly distributed (bottom shelf capacity is 200 lbs. evenly distributed). Sliding Doors is the perfect solution for restricted space areas such as hallways and add only 3½" depth to cabinet.
