Material and Workmanship: All Stak-N-Lok™ units are manufactured from high quality, cold rolled steel, free of scale or rust. Exposed edges, corners and surface areas are free of any sharp edges. |
Assembly: All components come fully assembled. Individual tiers are packaged one per box . Except 7 Tier units will be shipped in 2 pieces, one piece will be 4- high with base and the second will be a 3- high with top.
Click here for standard assembly instructions. Click here for 7-tiers assembly instructions. |
TierSides: The sides and back of each tier section are manufactured from a single piece of 20 gauge cold rolled steel, formed to make three sides incorporating a continuous 3/4" flange on the top and bottom. |
Shelf: The tier shelf is manufactured from 20 gauge cold rolled steel. The front edge of the shelf has a 1/2" lip with a 1/2" return bend for maximum strength. The shelf is further reinforced with a 20 gauge welded steel channel along its entire length. The tier shelves are punched to include two tabs on the base, and one tab located in the rear. Each shelf includes a 18 gauge slotted formed channel welded to the inside of the tier. The rear tab of the adjustable dividers lock into this channel. Channels include slots punched on 2" centers that correspond to slots on shelves. |
Divider: Each opening or tier section includes two adjustable file dividers, manufactured from 20 gauge cold rolled steel and powder coat finished to match cabinet color. Dividers can be positioned on 2" centers along the entire shelf length. |
Door: The fully recessed door of each section is manufactured from 20 gauge cold rolled steel with a 5/8" edge and a 1/2" return bend. The door is also reinforced with a 20 gauge welded steel channel. Each door pivots on two 3/16" hardened steel pins and glides on two non-marring nylon pads. Each door also has two rubber pads to quiet its operation when being closed. |
Top: The top of each Stak-N-Lok™ unit is manufactured of 20 gauge cold rolled steel and is welded to the upper opening. |
Base: The base of each unit is manufactured from a single piece of 16 gauge cold rolled steel and includes four 5/16" x 18 threaded leveling domes. |
Lock: Locking Stak-N-Lok™ units are gang locked using dual 14 gauge lock bars which are mounted in the 3/4" side channels. The lock is typically located in the top section and can be re-keyed in the field. |
Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating provides a superior, attractive, uniform finish that is more durable, scratch and corrosion resistant, and environmentally friendly than liquid paint. |